FANMIG MOST 212 LCD - Semi-Automatic Welding Inverter

FANMIG 212 LCD is a cutting edge semi-automatic welding inverter machine
designed for MIG/MAG welding, TIG DC (scratch start) and MMA coated electrode welding. The device operates synergic or manual mode and includes a wide range of programmes for steel, stainless steel and aluminium. Programms for MIG brazing with CuSi3 0,8 mm and 1,0 mm wires are also available. FANMIG 212 LCD is a compact machine: power source and wire feeder are there in the same body. On the rear shelf there is a place for gas cylinder (max. 120 cms high).

The device is powered from a single-phase 230V. A PFC (Power Factor Correction) filter has been included in the device. The advantage of an inverter with PFC are: higher energetic effectiveness, lower load for electric network, greater tolerance to current fluctuations and less interference generated by the device.

The 4-rolls wire feeder enables wire welding with 15 kg / K300 spools.
Recommended steel wire diameters are 0.8 - 1.0 mm and 1.0 mm for aluminium.
After change to the polarisation it is possible to apply self-shielding flux cored wire 0,8 or 0,9 mm.

Main applications:

• Light renovation works,
• Car body repairs,
• Crafting, production of light steel structures,
• Hobby.

Control panel equipped with display presents text messages. Parameter setting is executed with two knobs used both for choosing and confirming functions or values.

The device is supplied with a ground cable and for coated electrode welding MMA, a gas hose and a manual booklet, standard rolls for 0.8-1.0 mm steel wire

Device assembly:
The device is supplied with earth cable for coated electrode welding, a gas hose and a user's manual, standard rolls for 0,8-1,0 mm steel wire.

Additional welding torches and accessories (optional):

• Welding torch M24 SGRIP 3 m - 55 08 302430
• Welding torch M24 SGRIP 4 m - 55 08 302440
• Welding torch M24 SGRIP 5 m - 55 08 302450
• Welding torch M15 SGRIP 3 m - 55 08 301530
• Welding torch M15 SGRIP 4 m - 55 08 301540
• Welding torch M15 SGRIP 5 m - 55 08 301550
• Welding torch TIG 26 SGRIP 4 m - 56 01 082622
• Roll 0,8-1,0 30/22 - 51 13 007826
• Roll 0,6-0,8 30/22 - 51 13 007783

Accessories for aluminium welding and brazing (recommended wire diameter: 1,0 mm, AlMg5):

• Roll 1,0AL-1,2AL - 51 13 007863
• Graphite-teflon liners for welding torch:
  55 13 013010 (3 m);
  55 13 013020 (4 m);
  55 13 013030 (5 m).
• Brass tube for EURO connection - 51 13 008011.

Warranty: 24 months.

Data sheet

Ask about price